20" Rotatech Chainsaw Guide Bar For ECHO CS-620SX
In Stock Warning: Last items in stock!
Free delivery on all UK orders over £75*
Using a 24hr Courier service
100% secure online shopping
We accept Visa, Mastercard, Maestro Cirrus, SagePay and PayPal.
Brand New High Quality Low Cost Chainsaw Chain Exclusive To Northern Arb Supplies
Chainsaw chain manufacturing has been a black art for many years and only the well-known chainsaw manufacturers have managed to produce a chain that performs well, wears consistently and retains its integrity at the high end of the market…..That is until now!! Development in different steels from America’s elite chainsaw engineers has now produced a chain that will stand up to the quality our Arborists demand and at a fraction of the cost.
Rotatech Chainsaw Chain has recently been launched and is only available at Northern Arb Supplies. Rotatech™ Chains are a low cost high quality replacement chain, designed to compete with the bigger more expensive brands on the market. In some cases around 66% cheaper than a well known brands equivalent.
With Rotatech MS201T 12” chain costing only £5.98 and a Guide Bar for the same saw costing only £14.99 it’s hard to ignore the savings that come with switching to Rotatech. We have done competitor research and on average a Rotatech equivalent chain is one third of the price of the leading brand but still has the quality to back this saving up.
John From The Tree Man Says
expected, They stay sharp and are excellent value for money”
Bill From WTL Fencing Says
Please use the selector above to find the part number for your saw then check it to the below table.
Part Number Explained: A1044 (A1) = Chain Type (044) = Number Of Drive Links
C3SFT056 (C3SFT) = Chain Type (056) = Number Of Drive Links
A0 - Pitch:3/8" lp Gauge: 1.1mm (.043") Cutter: Semi-Chisel
A1 - Pitch:3/8" lp Gauge: 1.3mm (.050") Cutter: Semi-Chisel
B1FT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Semi-Chisel
B1SFT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Full-Chisel
B2SFT - Pitch:.325" Gauge: 1.5mm (.058") Cutter: Full-Chisel
B3SFT - Pitch:.325" Gauge: 1.6mm (.063") Cutter: Full-Chisel
C1SFT - Pitch:3/8" Gauge: 1.3mm (.050") Cutter: Full-Chisel
C2SFT - Pitch:3/8" Gauge: 1.5mm (.058") Cutter: Full-Chisel
C3SFT - Pitch:3/8" Gauge: 1.6mm (.063") Cutter: Full-Chisel
|Length Of Guide Bar||20"|