New England Tachyon 11.1mm (7/16 inch) Climbing Rope
Free delivery on all UK orders over £75*
Order by 2pm for Next Day delivery.
100% secure online shopping
We accept Visa, Mastercard, Maestro Cirrus, SagePay and PayPal.
Consisting of a polyester cover which significantly improves friction hitch performance without “bagginess”. The core consists of a polyamide inner core. This inner core construction keeps the diameter consistent, even in the loaded state.
The rope diameter of 11.1 mm is ideal for tree care operations. It ensures a better grip, thus reducing hand fatigue. It works perfectly in combination with standard hardware designed for use with 11 mm ropes.
New England Tachyon Ropes are certified to EN 1891. Hence, the can also be used in systems to EN 341 for descender devices, to EN 358 for work positioning systems, and to EN 363 for fall protection systems.
Please Note: No blanket Safe Working Load (SWL) recommendations can be made for any line because SWL’s must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user’s industry; by professional judgment and personal experience; and after thorough assessment of all risks.
The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.
Customers also bought…
The DMM range of pulleys is designed for rugged use in a work environment and use 4 mm thick 2014T6 side plates to enhance durability. All pulleys are riveted and tamper proof, we use high strength nickel chrome molly ground steel spindles, running in pre lubricated sintered bronze bearings, which are machined after fitting to the pulley sheave to give...
• Hot forged 7075 T6 aluminium side plates provide strengthand durability• Heat treated 174PH stainless steel spindles for high strength andcorrosion resistance• Riveted and tamperproof assembly• Pre lubricated sintered bronze bearings for ultra smooth operation• Recommended for aborist, rescue, hauling and many applicationswhere friction reduction is...