loading spinner

Rotatech B2 74 Drive Links Full-Chisel Chainsaw Chain

£9.42

Tax excluded

  • Rotatech® Chain
  • Pitch: .325"
  • Gauge: 1.5mm (.058")
  • No Of Drive Links: 74
  • Can`t Find Your Chain Listed? 
  • Please Get In Touch We Can Make Chains To Any Size!
  • Order 2 to get FREE Delivery
  • Buy 10 or more to get 10% off  & Free Shipping 

Quantity
In Stock | Immediate Dispatch
 

100% Secure payments via PayPal, Stripe & AmazonPay

 

Free UK Mainland Delivery On Orders Over £75*

Optimised for maximum performance, Rotatech chains are fine-tuned to deliver the best cutting results possible. Whether you are undertaking landscaping or forestry work, the chains are precisely-made to help you work more efficiently while improving productivity. With over 6,000 models to choose from, Rotatech chains will enable your chainsaw to deliver better performance throughout its working life. 

With up to 50% of the OEM price, the chains have proved to stand up to the quality the arborist demands. They perform well, wear consistently and retain integrity. In collaboration with professionals in the arboriculture industry, Rotatech chains have been tested and developed to ensure they optimise your output.

B2SFT074

Data sheet

Pitch
.325"
Gauge
1.5mm (.058")
No Of Drive Links
74

We accept all major credit and debit cards through a secured and fully PCI-compliant hosted payment pages. Online payments can also be made through PayPal and other gateways available at checkout points.

To comply with the Payment Card Industry Data Security Standard (PCI DSS), we do not store your payment card details. For maximum security, we use trusted payment gateways such as SagePay, PayPal and Amazon. For any concerns you may have please do not hesitate to contact us on 0114 278 9090.

Delivery/Shipping

We offer FREE Shipping on all UK orders over £75.01! (excluding VAT @ 20%)

Shipping is £5.50 + VAT on orders below the value of £75.00 (excluding VAT @ 20%)

Goods will be shipped out using the select method of delivery, chosen at the checkout.

Please note: We are closed on Saturday & Sunday, all returns and delivery will be handled on the next working day. 

  • Mon-Thurs 8.00am-5.00pm
  • Fri 8.00am-3.30pm

Returns Address

Northern Arb Supplies
Unit 12 Parkway Close,
Darnall,
Sheffield
S9 4WJ

Click here to use our online returns manager

In some cases, ladders may not be in stock with our supplier. If this is the case, you will be contacted by a member of our team who will advise an estimated delivery date.

Part Numbers Explained: 

A1044 (A1) = Chain Type (044) = Number Of Drive Links

C3SFT056 (C3SFT) = Chain Type (056) = Number Of Drive Links

Chain Types:

  • A0 - Pitch:3/8" lp Gauge: 1.1mm (.043") Cutter: Semi-Chisel
  • A1 - Pitch:3/8" lp Gauge: 1.3mm (.050") Cutter: Semi-Chisel
  • B1FT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Semi-Chisel
  • B1SFT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Full-Chisel
  • B2SFT - Pitch:.325" Gauge: 1.5mm (.058") Cutter: Full-Chisel
  • B3SFT - Pitch:.325" Gauge: 1.6mm (.063") Cutter: Full-Chisel
  • C1SFT - Pitch:3/8" Gauge: 1.3mm (.050") Cutter: Full-Chisel
  • C2SFT - Pitch:3/8" Gauge: 1.5mm (.058") Cutter: Full-Chisel
  • C3SFT - Pitch:3/8" Gauge: 1.6mm (.063") Cutter: Full-Chisel

How to measure a chainsaw bar:
Step 1
Turn off the chainsaw and unplug its spark plug. You can easily access the spark plug by taking out the carburettor box located at the rear side of your chainsaw. Doing this ensures that your chainsaw doesn’t accidentally turn on while you are taking the measurements.
Step 2
Align the tape measure tip with the chainsaw edge at the point where its bar emerges. Steady the chainsaw by laying it across a flat surface. This makes it easier to quickly extend the tape measure and take an accurate measurement.
Step 3
Pull your tape measure tightly so that it is properly aligned with the farthest tooth of your chainsaw’s nose. Note down the length and then round it up to its closest whole inch. In most instances, this figure will lie in the 12” to 20” range. If you’re not sure of the measurement, make it a point to repeat the exercise a few times. Keep in mind that this is the actual cutting length of your bar and not its entire length. You would need just to use this figure to replace your bar or chain.
Step 4
Remove the metal/plastic casing. You can do this by using the right socket or wrench. Once this casing has been removed, the covered section of the bar would be revealed and you can measure it. This would be the entire bar measurement.
Step 5
And finally, simply reattach the casing as well as the spark plug just as it was before.

Register

New Account Register

Already have an account?
Log in instead Or Reset password