loading spinner

Rotatech 5/32" Round Chainsaw Files Pack Of 12


Tax excluded


Rotatech Chainsaw Files

Size: 5/32"

Pack Of 3 Files

Also available in packs of 12 files.


Rotatech chainsaw files are perfect for sharpening all makes of chainsaw chain. Our files are specially manufactured to stay sharper for longer so they can be used repeatedly to maintain the efficiency of your chain. They are a great economical solution for reviving dull chains and saving you money on maintenance costs in the long run. Each file is engineered with precision to ensure they sharpen chains effectively without the risk of damaging it. When using chainsaw files make sure you match the gauge of the files with the gauge of the chain in order to get the best possible results. For more information use our chainsaw file guide.


Data sheet

File Size
5/32" (4mm)

We accept all major credit and debit cards through a secured and fully PCI-compliant hosted payment pages. Online payments can also be made through PayPal and other gateways available at checkout points.

To comply with the Payment Card Industry Data Security Standard (PCI DSS), we do not store your payment card details. For maximum security, we use trusted payment gateways such as SagePay, PayPal and Amazon. For any concerns you may have please do not hesitate to contact us on 0114 278 9090.


We offer FREE Shipping on all UK orders over £75.01! (excluding VAT @ 20%)

Shipping is £5.50 + VAT on orders below the value of £75.00 (excluding VAT @ 20%)

Goods will be shipped out using the select method of delivery, chosen at the checkout.

Please note: We are closed on Saturday & Sunday, all returns and delivery will be handled on the next working day. 

  • Mon-Thurs 8.00am-5.00pm
  • Fri 8.00am-3.30pm

Returns Address

Northern Arb Supplies
Unit 4, 80 Parkwood Road
Neepsend Industrial Estate
South Yorkshire
S3 8AG

Part Numbers Explained: 

A1044 (A1) = Chain Type (044) = Number Of Drive Links

C3SFT056 (C3SFT) = Chain Type (056) = Number Of Drive Links

Chain Types:

  • A0 - Pitch: 3/8" lp Gauge: 1.1mm (.043") Cutter: Semi-Chisel
  • A1 - Pitch: 3/8" lp Gauge: 1.3mm (.050") Cutter: Semi-Chisel
  • B1FT - Pitch: .325" Gauge: 1.3mm (.050") Cutter: Semi-Chisel
  • B1SFT - Pitch: .325" Gauge: 1.3mm (.050") Cutter: Full-Chisel
  • B2SFT - Pitch: .325" Gauge: 1.5mm (.058") Cutter: Full-Chisel
  • B3SFT - Pitch: .325" Gauge: 1.6mm (.063") Cutter: Full-Chisel
  • C1SFT - Pitch: 3/8" Gauge: 1.3mm (.050") Cutter: Full-Chisel
  • C2SFT - Pitch: 3/8" Gauge: 1.5mm (.058") Cutter: Full-Chisel
  • C3SFT - Pitch: 3/8" Gauge: 1.6mm (.063") Cutter: Full-Chisel
  • D3S - Pitch: .404" Gauge: 1.6mm (.063") Cutter: Full-Chisel
  • E0 - Pitch: 1/4" Gauge: 1.1mm (.043") Cutter: Semi-Chisel
  • E1 - Pitch: 1/4" Gauge: 1.3mm (.050") Cutter: Semi-Chisel

How to measure a chainsaw bar:
Step 1
Turn off the chainsaw and unplug its spark plug. You can easily access the spark plug by taking out the carburettor box located at the rear side of your chainsaw. Doing this ensures that your chainsaw doesn’t accidentally turn on while you are taking the measurements.
Step 2
Align the tape measure tip with the chainsaw edge at the point where its bar emerges. Steady the chainsaw by laying it across a flat surface. This makes it easier to quickly extend the tape measure and take an accurate measurement.
Step 3
Pull your tape measure tightly so that it is properly aligned with the farthest tooth of your chainsaw’s nose. Note down the length and then round it up to its closest whole inch. In most instances, this figure will lie in the 12” to 20” range. If you’re not sure of the measurement, make it a point to repeat the exercise a few times. Keep in mind that this is the actual cutting length of your bar and not its entire length. You would need just to use this figure to replace your bar or chain.
Step 4
Remove the metal/plastic casing. You can do this by using the right socket or wrench. Once this casing has been removed, the covered section of the bar would be revealed and you can measure it. This would be the entire bar measurement.
Step 5
And finally, simply reattach the casing as well as the spark plug just as it was before.

It’s smoooth and simple

When you choose Klarna at checkout, you’ll get the option to shop now and pay later for your purchase.

Pay in 30 days

Make your purchase today pay up to 30 days later. No interest. No fees. No impact on your credit score.


Apply for monthly financing during checkout. It’s a simple, 2-step application process with an instant decision. When approved, you can manage your payments and get payment reminders in the Klarna app.

Pay in 3 instalments

Split your purchase into three equal payments so you can spread the cost of your purchase over time. Enter the credit or debit card details of your choice and make automatic payments every 30 days. Your first instalment will be collected when your order is confirmed by the merchant and instalments 2 and 3 are scheduled 30 and 60 days later, respectively. No interest or fees. No impact on your credit score.

Find out more here


New Account Register

Already have an account?
Log in instead Or Reset password