- New
25" Rotatech Chainsaw Chain For STIHL 08S Full-Chisel
Price
£14.08
Rotatech® Chain to fit STIHL 08S Chainsaws when fitted with a 25" Guide Bar.100% moneyback guaranteeLow cost high quality replacement...
High performance Rotatech Chainsaw bars compatible with your STIHL Chainsaw.
- Hardened bar rails for longer life span.
- Used by 1000s of tree surgeons & arborists
- Saves up to 15% in weight compared with similar bar sizes.
- Newly improved ematic system to ensure measured oil is delivered where needed.
Free Delivery available when you order any bar with 2 chains!
25" Rotatech Chainsaw Guide Bar For STIHL 08S
£36.00
Tax excluded
SR25-63TQ-STIHL 08S
High performance Rotatech Chainsaw bars compatible with your STIHL Chainsaw.
- Hardened bar rails for longer life span.
- Used by 1000s of tree surgeons & arborists
- Saves up to 15% in weight compared with similar bar sizes.
- Newly improved ematic system to ensure measured oil is delivered where needed.
Free Delivery available when you order any bar with 2 chains!
100% Secure payments via PayPal, Stripe & AmazonPay
Free UK Mainland Delivery On Orders Over £75*
Packed with durability and strength, Rotatech bars are the ultimate choice for many tree professionals. The combined low weight and stability attain an advantage allowing you to work easier and more efficiently. The laminated bar range reduces the risk of kickback and facilitates good control while cutting. For heavy-duty work, the new generation solid bars are robust, thick and perform brilliantly in sandy, dusty and sooty conditions.
Alongside the different sizes offered, Rotatech bars are also designed for a wide range of requirements and applications. In collaboration with industry professionals, the bars have been tested and fined-tuned to ensure better bar and chain workability.
SR25-63TQ-STIHL 08S
Data sheet
- Chainsaw Make
- STIHL
- Chainsaw Model
- 08S
- Length Of Guide Bar
- 25"
We accept all major credit and debit cards through a secured and fully PCI-compliant hosted payment pages. Online payments can also be made through PayPal and other gateways available at checkout points.
To comply with the Payment Card Industry Data Security Standard (PCI DSS), we do not store your payment card details. For maximum security, we use trusted payment gateways such as SagePay, PayPal and Amazon. For any concerns you may have please do not hesitate to contact us on 0114 278 9090.
Delivery/Shipping
We offer FREE Shipping on all UK orders over £75.01! (excluding VAT @ 20%)
Shipping is £5.50 + VAT on orders below the value of £75.00 (excluding VAT @ 20%)
Goods will be shipped out using the select method of delivery, chosen at the checkout.
Please note: We are closed on Saturday & Sunday, all returns and delivery will be handled on the next working day.
- Mon-Thurs 8.00am-5.00pm
- Fri 8.00am-3.30pm
Returns Address
Northern Arb Supplies
Unit 12 Parkway Close,
Darnall,
Sheffield
S9 4WJ
Part Numbers Explained:
A1044 (A1) = Chain Type (044) = Number Of Drive Links
C3SFT056 (C3SFT) = Chain Type (056) = Number Of Drive Links
Chain Types:
- A0 - Pitch:3/8" lp Gauge: 1.1mm (.043") Cutter: Semi-Chisel
- A1 - Pitch:3/8" lp Gauge: 1.3mm (.050") Cutter: Semi-Chisel
- B1FT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Semi-Chisel
- B1SFT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Full-Chisel
- B2SFT - Pitch:.325" Gauge: 1.5mm (.058") Cutter: Full-Chisel
- B3SFT - Pitch:.325" Gauge: 1.6mm (.063") Cutter: Full-Chisel
- C1SFT - Pitch:3/8" Gauge: 1.3mm (.050") Cutter: Full-Chisel
- C2SFT - Pitch:3/8" Gauge: 1.5mm (.058") Cutter: Full-Chisel
- C3SFT - Pitch:3/8" Gauge: 1.6mm (.063") Cutter: Full-Chisel
How to measure a chainsaw bar:
Step 1
Turn off the chainsaw and unplug its spark plug. You can easily access the spark plug by taking out the carburettor box located at the rear side of your chainsaw. Doing this ensures that your chainsaw doesn’t accidentally turn on while you are taking the measurements.
Turn off the chainsaw and unplug its spark plug. You can easily access the spark plug by taking out the carburettor box located at the rear side of your chainsaw. Doing this ensures that your chainsaw doesn’t accidentally turn on while you are taking the measurements.
Step 2
Align the tape measure tip with the chainsaw edge at the point where its bar emerges. Steady the chainsaw by laying it across a flat surface. This makes it easier to quickly extend the tape measure and take an accurate measurement.
Align the tape measure tip with the chainsaw edge at the point where its bar emerges. Steady the chainsaw by laying it across a flat surface. This makes it easier to quickly extend the tape measure and take an accurate measurement.
Step 3
Pull your tape measure tightly so that it is properly aligned with the farthest tooth of your chainsaw’s nose. Note down the length and then round it up to its closest whole inch. In most instances, this figure will lie in the 12” to 20” range. If you’re not sure of the measurement, make it a point to repeat the exercise a few times. Keep in mind that this is the actual cutting length of your bar and not its entire length. You would need just to use this figure to replace your bar or chain.
Pull your tape measure tightly so that it is properly aligned with the farthest tooth of your chainsaw’s nose. Note down the length and then round it up to its closest whole inch. In most instances, this figure will lie in the 12” to 20” range. If you’re not sure of the measurement, make it a point to repeat the exercise a few times. Keep in mind that this is the actual cutting length of your bar and not its entire length. You would need just to use this figure to replace your bar or chain.
Step 4
Remove the metal/plastic casing. You can do this by using the right socket or wrench. Once this casing has been removed, the covered section of the bar would be revealed and you can measure it. This would be the entire bar measurement.
Remove the metal/plastic casing. You can do this by using the right socket or wrench. Once this casing has been removed, the covered section of the bar would be revealed and you can measure it. This would be the entire bar measurement.
Step 5
And finally, simply reattach the casing as well as the spark plug just as it was before.
And finally, simply reattach the casing as well as the spark plug just as it was before.
You might also like
