loading spinner

20" Rotatech Chainsaw Guide Bar For HUSQVARNA 562XP


Tax excluded


Rotatech® 20" bar to fit HUSQVARNA 562XP Chainsaws

  • Hardened bar rails for longer life span. 
  • Used by 1000s of tree surgeons & arborists
  • Saves up to 15% in weight compared with similar bar sizes.
  • Newly improved ematic system to ensure measured oil is delivered where needed.
  • Free Delivery available when you order any bar with 2 chains!

In Stock | Immediate Dispatch

Pay in 3 instalments or Pay in 30 days. No interest. No fees


Free UK Mainland Delivery On Orders Over £75*


100% Secure payments via PayPal, Stripe & AmazonPay

Frequently bought together

Chainsaw Bars

Rotatech Chainsaw Oil 205L
Rotatech Chainsaw Oil 205L
Rotatech Chainsaw Oil 25L
Rotatech Chainsaw Oil 25L
Rotatech Chainsaw Oil 5L
Rotatech Chainsaw Oil 5L
Rotatech Two Stroke Oil 1L
Rotatech Two Stroke Oil 1L

Packed with durability and strength, Rotatech bars are the ultimate choice for many tree professionals. The combined low weight and stability attain an advantage allowing you to work easier and more efficiently. The laminated bar range reduces the risk of kickback and facilitates good control while cutting. For heavy-duty work, the new generation solid bars are robust, thick and perform brilliantly in sandy, dusty and sooty conditions. 

Alongside the different sizes offered, Rotatech bars are also designed for a wide range of requirements and applications. In collaboration with industry professionals, the bars have been tested and fined-tuned to ensure better bar and chain workability.


Data sheet

Chainsaw Make
Chainsaw Model
Length Of Guide Bar

We accept all major credit and debit cards through a secured and fully PCI-compliant hosted payment pages. Online payments can also be made through PayPal and other gateways available at checkout points.

To comply with the Payment Card Industry Data Security Standard (PCI DSS), we do not store your payment card details. For maximum security, we use trusted payment gateways such as SagePay, PayPal and Amazon. For any concerns you may have please do not hesitate to contact us on 0114 278 9090.


We offer FREE Shipping on all UK orders over £75.01! (excluding VAT @ 20%)

Shipping is £5.50 + VAT on orders below the value of £75.00 (excluding VAT @ 20%)

Goods will be shipped out using the select method of delivery, chosen at the checkout.

Please note: We are closed on Saturday & Sunday, all returns and delivery will be handled on the next working day. 

  • Mon-Thurs 8.00am-5.00pm
  • Fri 8.00am-3.30pm

Returns Address

Northern Arb Supplies
Unit 12 Parkway Close,
S9 4WJ

Click here to use our online returns manager

Part Numbers Explained: 

A1044 (A1) = Chain Type (044) = Number Of Drive Links

C3SFT056 (C3SFT) = Chain Type (056) = Number Of Drive Links

Chain Types:

  • A0 - Pitch:3/8" lp Gauge: 1.1mm (.043") Cutter: Semi-Chisel
  • A1 - Pitch:3/8" lp Gauge: 1.3mm (.050") Cutter: Semi-Chisel
  • B1FT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Semi-Chisel
  • B1SFT - Pitch:.325" Gauge: 1.3mm (.050") Cutter: Full-Chisel
  • B2SFT - Pitch:.325" Gauge: 1.5mm (.058") Cutter: Full-Chisel
  • B3SFT - Pitch:.325" Gauge: 1.6mm (.063") Cutter: Full-Chisel
  • C1SFT - Pitch:3/8" Gauge: 1.3mm (.050") Cutter: Full-Chisel
  • C2SFT - Pitch:3/8" Gauge: 1.5mm (.058") Cutter: Full-Chisel
  • C3SFT - Pitch:3/8" Gauge: 1.6mm (.063") Cutter: Full-Chisel

How to measure a chainsaw bar:
Step 1
Turn off the chainsaw and unplug its spark plug. You can easily access the spark plug by taking out the carburettor box located at the rear side of your chainsaw. Doing this ensures that your chainsaw doesn’t accidentally turn on while you are taking the measurements.
Step 2
Align the tape measure tip with the chainsaw edge at the point where its bar emerges. Steady the chainsaw by laying it across a flat surface. This makes it easier to quickly extend the tape measure and take an accurate measurement.
Step 3
Pull your tape measure tightly so that it is properly aligned with the farthest tooth of your chainsaw’s nose. Note down the length and then round it up to its closest whole inch. In most instances, this figure will lie in the 12” to 20” range. If you’re not sure of the measurement, make it a point to repeat the exercise a few times. Keep in mind that this is the actual cutting length of your bar and not its entire length. You would need just to use this figure to replace your bar or chain.
Step 4
Remove the metal/plastic casing. You can do this by using the right socket or wrench. Once this casing has been removed, the covered section of the bar would be revealed and you can measure it. This would be the entire bar measurement.
Step 5
And finally, simply reattach the casing as well as the spark plug just as it was before.

It’s smoooth and simple

When you choose Klarna at checkout, you’ll get the option to shop now and pay later for your purchase.

Pay in 30 days

Make your purchase today pay up to 30 days later. No interest. No fees. No impact on your credit score.


Apply for monthly financing during checkout. It’s a simple, 2-step application process with an instant decision. When approved, you can manage your payments and get payment reminders in the Klarna app.

Pay in 3 instalments

Split your purchase into three equal payments so you can spread the cost of your purchase over time. Enter the credit or debit card details of your choice and make automatic payments every 30 days. Your first instalment will be collected when your order is confirmed by the merchant and instalments 2 and 3 are scheduled 30 and 60 days later, respectively. No interest or fees. No impact on your credit score.

Find out more here


New Account Register

Already have an account?
Log in instead Or Reset password