Large Cast Pulley for 16mm to 20mm Rope
Medium Stainless Steel Pulley for 16mm Rope
Small Cast Pulley for 13mm to 16mm Rope
DMM Impact Block IMB - S Designed for use in the tree care industry when loads may be dropped into rigging with considerable impact forces. The combination of high quality materials and advanced production processes has ensured a rope friendly, durable and robust Impact Block from DMM.
DMM Impact Block IMB - L Designed for use in the tree care industry when loads may be dropped into rigging with considerable impact forces. The combination of high quality materials and advanced production processes has ensured a rope friendly, durable and robust Impact Block from DMM.
ISC Medium Cast Pulley For 16mm to 20mm Rope
Barcode (UPC-A) 100010019167 Application Rigging Material Cast Aluminium Min Breaking Strength (kN) 85 Working Load Limit (kN) 17 Diameter (mm) 13 Cheek Action Swing Length (mm) 125 Width (mm) 76 Weight (g) 490 Colour Green Proof Tested Yes Standard CE Marked Finish Powder Coated Serial Number Yes Manufacturer ISC
Single Pulley for 13mm Rope (Steel Wheel with Bearings) Pulleys in our Heavy-duty Prussik range have tamper-proof Rivets, in compliance with CE EN12278 (2007) & NFPA (1983)* These Pulleys are available in Aluminium or Stainless Steel, with Bushings or Roller Bearings. Bushings are ideal for high loads at low speeds and Roller Bearings are ideal for...
Petzl Tandem Cable Double Pulley For Use With Ropes & Cables The Tandem Cable is designed for smooth and efficient Tyrolean traverses on rope. Stainless steel sheaves for excellent durability Sheave mounted on self-lubricating bushings for efficiency Maximum allowable speed: 10 m/s Attachment point accepts up to three carabiners to facilitate use
Petzl Tandem Speed Double Pulley For Tyrolean Traverses On Cable Or Rope Stainless steel sheaves for excellent durability Sheave mounted on sealed ball bearings for excellent efficiency Accepts up to three carabiners to facilitate use
Petzl Tandem Double Pulley For Use With Ropes
Prevents the sideplates of the DMM Pinto Rig pulley from being squeezed together when rope is run through the eyes of the pulley Hole diameters 15mm Width 14mm
VMedium Swing Cheek Pulley 13mm rope
Large Swing Cheek Pulley 16mm rope
Medium Double Swing Cheek Pulley 13mm rope
Large Double Swing Cheek Pulley 16mm rope
The RC-3100 Pre-Tension pulley has been designed to work in conjunction with the range of RC Lowering Devices. Simply attach a prusik to the main rigging line attach the pulley to the prusik place a couple of wraps around the lowering device then loop up to the pulley; you now have a simple 3:1 ratio tensioning system which can easily be loaded,...